AC DC Motor for Oil Field Pumping Unit

Product Description:
 
DC motor is a rotating motor that can change DC electric powered strength into mechanical vitality (DC motor) or mechanical vitality into DC electrical energy (DC generator). It is a motor that can convert DC and mechanical vitality into one particular another. When it operates as a motor, it is a direct existing motor, which converts electrical power into mechanical energy when it operates as a generator, it is a direct current generator, which converts mechanical power into electrical strength.
 

Item Name AC Dc motor For oil field pumping device
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition composition The composition of DC motor should consist of two elements: stator and rotor. The static portion of DC motor is named stator. The main purpose of stator is to create magnetic subject, which is composed of foundation, major magnetic pole, commutation pole, finish cap, bearing and brush device. Operating portion is known as rotor, whose primary operate is to generate electromagnetic torque and inductive electromotive power. It is the hub of power conversion of DC motor. So it is also generally named armature, which consists of rotor, armature main, armature winding, commutator and supporter.
Model ZSN,ZTP,Z4,Z2
Working velocity  Constant Speed /Lower Velocity /Modify Pace /Higher Speed Other 
Primary classification DC Motor is a machine that converts mechanical strength into DC electricity. It is mostly utilised as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electricity offer of alternator. Even though in areas exactly where DC power is needed, AC energy rectifier is also utilized to change AC into DC electricity, but from some elements of functionality, AC rectifier power offer can not entirely replace DC generator.  
Security grade IP55
Thermal Class a hundred and fifty five (F)
Software DC motors are extensively used in tape recorders, video recorders, video discs, electric powered shavers, hair dryers, electronic watches, toys and so on.
Routine maintenance strategy Specialist motor servicing middle motor routine maintenance approach: cleaning stator and rotor – changing carbon brush or other elements – vacuum F stress dipping paint – drying – Calibration stability.
1. Use setting ought to be always dry, motor floor need to be held clear, air ingestion must not be hindered by dust, fibers and other obstacles.
2. When the thermal defense of the motor continues to operate, it ought to be ascertained no matter whether the fault arrives from the motor or the overload or the location benefit of the protective gadget is as well lower. Soon after eliminating the fault, it can be put into operation.
3, ensure that the motor is properly lubricated during procedure. The basic motor operates for about 5000 hrs, that is to say, lubricating grease must be added or changed. When bearing overheating or lubricating deterioration is identified in procedure, the hydraulic pressure need to adjust lubricating grease in time. When changing grease, the previous grease must be removed, and the oil groove of bearing and bearing protect should be washed with gasoline. Then ZL-3 lithium grease need to be filled with one/two (two poles) and 2/3 (4 poles, six poles and 8 poles) of the cavity between the interior and outer rings of the bearing.
4. When the daily life of the bearing is above, the vibration and sound of the motor will increase naturally. When the radial clearance of the bearing reaches the adhering to worth, the bearing should be replaced.
5, when eliminating the motor, it is Alright to take away the rotor from the shaft extension or the non extension end. If it is not required to unload the supporter, it is much more convenient to take out the rotor from the non-axle extension conclude. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from currently being destroyed.
6. When changing the windings, the form, dimension, turns and gauges of the unique windings must be recorded. When these data are missing, they must be received from the manufacturer and the first created windings need to be altered at will, which usually deteriorates one or many overall performance of the motor or even tends to make it impossible to use them.

 

 

AC DC Motor for Oil Field Pumping Unit