Model Number: LCMT-75M02NB-180M48015B+380V servo drive
Type: SERVO MOTOR
Frequency: 50-60HZ
Phase: Three-phase
Protect Feature: Waterproof
AC Voltage: 380V
Efficiency: IE 2
Driver Model: LCDA-757502-MB1834
Holding Torque: 48Nm
Rated Speed: 1500RPM
Rated Voltage: 380V
Rated Current: 20A
Encoder Line Number: 2500PPR
Motor Weight: 40Kg
Safety Class: IP65
Application: CNC machine
Product Name: 7.5KW 180ST AC Servo Motor System
Certification: ce
Packaging Details: Normal cartons

AC servo motor 7.5KW 3phase AC380V motor 48Nm 1500rpm Flange180 180st-M48015 7.5kw servo motor with driver kit for CNC milling

Packing List
No. Product Model / DescriptionQty1 HangZhou 7.5KW 180ST-M48015 Servo Motor LCMT-75M02NB-180M48015B12 HangZhou 7.5KW 380V AC Servo Driver LCDA-757502-MB183413 Motor Cable Standard (3m)14 Encoder Cable Standard (3m)15 Servo Driver Instruction Book Standard 1
Longer cable available, please contact me if you need.

»» HangZhou 7.5KW 180ST-M48015 Servo Motor Information
HangZhou 180 series AC servo motor contains 4.5KW, 5.5KW, 7.5KW power specifications, the motor adopts Japan Tamagawa 2500 cable encoder, advanced magnetic circuit design and high temperature permanent magnet material , Servo motor running smoothly, the noise is very small, suitable for a variety of industrial automation equipment, high precision control applications.

HangZhou AC Servo Motor Naming Rules
LCMT – 45 M 02 N B – 180 M215 20 B

  • LCMT— Product information
  • 45——– 4.5KW ( 04—400W / 07—750W / 10—1KW )
  • M———- Motor inertia ( L—low / M—middle )
  • 02——– Sensing form ( 01—line saving encoder 2500 02—15 type encoder 2500 )
  • N———-Without brake ( Z—with brake )
  • B——— only keyway no oil seal ( A—only oil seal no keyway C—oil seal and keyway )
  • 180——-Frame size
  • M215— Torque 21.5Nm
  • 20——–Speed 2000rpm
  • B——— B series ( A— A series / C— C series )
  • HangZhou 180mm Series 7.5KW AC Servo Motor Specification

    Pictures

    »» 380V 7.5KW AC Servo Driver Information
    HangZhou 3 Phase 380V servo driver support speed, position control mode mode, can match the domestic 150 ~ 180 series, 7.5KW following AC servo motor. Servo main IC using the United States Texas Instruments DSP all-digital chip, the module is the choice of imports of Mitsubishi, other major components are used well-known brands at home and abroad, the software features stable, low failure rate, adaptive driver 2.7KW ~ 7.5KW servo motor.

    HangZhou AC Servo Motor Naming Rules
    LCDA – 45 75 02 – M B 18 34

  • LCDA– Product information
  • 45——– Motor power ( 02—200W 04—400W / 07—750W / 10—1KW … )
  • 75——– CZPT current ( 20—20A / 30—30A / 50—50A / 75—75A )
  • 02——– Encoder information ( 01—line saving encoder / 02—15 type encoder )
  • M———- Motor inertia ( L—low / M—middle )
  • B———-Driver series ( A—A series / B—B series / C—C series )
  • 18———Frame size ( including 6 / 8 / 9 / 110 … )
  • 34——– Voltage ( 22—single phase 220v / 32—3 phase 220v / 34—3 phase 380v )

  • Features
    1. Power Range: 4.5kw
    2. Input Voltage: AC 380V , 1 phase / 3 phases
    3. Position / Speed control mode4. With MODBUS communication performance(RS-485 / RS-422 / RS-232),ASCII and RTU communication protocol5. Encoder: 2500ppr6. Articles made to order: drag ,oil seal7. Axis: Circular shaft / keyway

    Packaging & ShippingPackaging
    Packing Details : Packing, foam protectionDelivery Details : 3-30 days after order confirmed,delivery date for bulk order depends on order quantity.

    1.Motor,drive,cable system 2. Suitable box size 3. Complete package

    Shipping Method

    1.For sample orders ,we usually send the goods by International Business Express as above.2.For bulk products,we will send by sea or air,customer designated forwarders is also available.
    3.For Russian customers generanlly send by CDEK or DELIN,less than 20 days delivery,no tax fee and customs chearance easily. 4. Brazil,Argentina,Peru,India customers please give us your tax number after payment.

    Certifications

    Company Information
    HangZhou XinHangZhou Electric Co., LTD, which was founded in 2009, is a high-tech enterprise integrating product R&D, manufacturing and sales of industrial automation control system in HangZhou,China. Our main products include:
    AC Servo Motor System
    Closed Loop Stepper Motor Kit
    Hybrid Stepper Motor and Stepper Motor DriverHigh-precision Planetary Gearbox
    We are the offical distributor of weinview HMI, CZPT HMI, Fatek PLC, welcome to be our partners!
    Besides,We also have our official Aliexpress store,you can buy some samples for testing if you are interested in our HangZhou products: https:// /store/195717

    Trade Shows
    Buying Xihu (West Lake) Dis.s
    1.Before purchasing, please contact us to confirm the model number and specifications to avoid any misunderstanding.
    2.Product customization is also available,if you need motor brake or longer cables,please contact us in advance.
    3.About payment methods,we support T/T(bank transfer), Paypal(0.5% paypal charges), Western Union, ALIBABA assurance order accept.
    4.If you’d like to be our HangZhou distributor,we already have some agents in Germany and Vietnam,welcome and we will support you.
    Our Services
    ODM&OEM
    We support OEM/ODM,have serviced for many customers.
    Technical ServiceOur professional engineers will assist you with the model selection befor purchase,and also provide technical support after-sale.
    Quality GaranteeFrom the delivery date, you will have 1 year warranty for product quality.

    What Is a Gear Motor?

    A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

    Inertial load

    Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
    The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
    Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
    Motor

    Applications

    There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
    There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
    The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

    Size

    The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
    The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
    Motor

    Cost

    A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
    In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
    Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
    Motor

    Maintenance

    Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
    Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
    Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
    Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

    China factory AC servo motor 7.5KW 3phase AC380V motor 48Nm 1500rpm Flange180 180st-M48015 7.5kw servo motor with driver kit for CNC milling  near me factory China factory AC servo motor 7.5KW 3phase AC380V motor 48Nm 1500rpm Flange180 180st-M48015 7.5kw servo motor with driver kit for CNC milling  near me factory