High Quality 24V Copper Starter Relay for Hydraulic DC Motor

Standard Info Dimension(mm) 32×35.5×16.five
Weight ( g ) ≈35g
Speak to Arrangement 1A/1B
Speak to Materials AgSnOtwo
Ambient Temperature -forty five~+85ºC
Vibration 10~50Hz,.075mm
Shock 1000m/s²,(100g)
Specification Data Nominal Voltage nine~36VDC
Power Usage <1.5W
Operating Voltage seven.2V
Max. Motor Voltage 36V
Max. Switching Current 90A
Surge Current 2500A/10ms
Motor Resistance(R±15%) 60Ω
Speak to Voltage <60mV
Contact Resistance <0.6mΩ
Dielectric Strength Motor to Make contact with >4000VAC   1min
Throughout Open Make contact with >2000VAC   1min
CZPTal Life >10000cycles
Mechanical Daily life >100000cycles
Pulse Time 100ms~150ms
Selecting-up Time <65ms
Release Time <65ms
Insulation Resistance >1000MΩ(500VDC)

           Cautions of Latching Relay:

             1.Ideas of relay’s enter
            (one)Polarity-You should check out the polarity inside of of our technical specification, if solitary coil then”+ -” or “- +”are fine,

            you can adjust it by one particular pulse.If double coil then it’s needed to affirm “-+-” or “+-+”just before leaving the our manufacturing unit.

            (two)Driving-Please energize the relay at our recommend pulse width, rated voltage for reputable overall performance, if one.5

            moments or two moments of price or reduced driving situation plz validate with our engineer.
            (three)Relays’contact position could be modified during transportation or set up due to influence of exterior power,
            therefore remember to reset to the necessary position.

 

            two.Tips of relay’s output
            (1)When selecting the relay with hard connection,make sure you steer clear of the exterior power on load terminals in the course of or right after

            the installation.

            (2)When the relay will be linked with screw or bolts to the relays’ terminals, plz make confident your connection is

            mounted and prevent relay from damages or other security issues thanks to temp. Increase..

            (three)The sampling signal wires of items are minimal, please do not pull or torque for the duration of installation.

High Quality 24V Copper Starter Relay for Hydraulic DC Motor