Spot Supply of Small and Medium DC Motor in Z4-315-21 160kw 440V 500rpm Motor Plant

Item Description:
 
DC motor is a rotating motor that can convert DC electric powered vitality into mechanical strength (DC motor) or mechanical power into DC electric energy (DC generator). It is a motor that can change DC and mechanical strength into one particular another. When it operates as a motor, it is a direct recent motor, which converts electrical vitality into mechanical power when it runs as a generator, it is a direct present generator, which converts mechanical power into electrical vitality.
 

Merchandise Identify Spot Supply of Tiny and Medium DC Motor in Z4-315-21 160KW 440V 500rpm Motor Plant
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition structure The structure of DC motor should consist of two elements: stator and rotor. The static part of DC motor is referred to as stator. The major purpose of stator is to make magnetic subject, which is composed of foundation, primary magnetic pole, commutation pole, end cap, bearing and brush system. Managing part is referred to as rotor, whose principal perform is to generate electromagnetic torque and inductive electromotive pressure. It is the hub of strength conversion of DC motor. So it is also typically known as armature, which is composed of rotor, armature main, armature winding, commutator and admirer.
Model Z Kind
Seat number Z315-Z1000
power 60~2800kW
Voltage 220~1000V
Torque variety one.five ~180kNm
Security stage IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Operating pace  Constant Pace /Low Speed /Change Pace /High Speed Other 
Main classification DC Motor is a equipment that converts mechanical strength into DC power. It is mainly used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation power offer of alternator. Even though in locations in which DC energy is necessary, AC power rectifier is also used to change AC into DC power, but from some factors of performance, AC rectifier power source can not entirely change DC generator.  
Software DC motors are commonly utilised in tape recorders, online video recorders, video clip discs, electric shavers, hair dryers, digital watches, toys and so on.
Maintenance approach Professional motor routine maintenance middle motor maintenance method: cleansing stator and rotor – replacing carbon brush or other areas – vacuum F force dipping paint – drying – Calibration balance.
1. Use surroundings need to be often dry, motor surface should be kept thoroughly clean, air ingestion should not be hindered by dust, fibers and other obstacles.
two. When the thermal security of the motor proceeds to work, it must be ascertained regardless of whether the fault will come from the motor or the overload or the location worth of the protecting device is as well minimal. After eliminating the fault, it can be put into operation.
3, guarantee that the motor is well lubricated for the duration of operation. The common motor operates for about 5000 hrs, that is to say, lubricating grease should be added or changed. When bearing overheating or lubricating deterioration is found in procedure, the hydraulic stress must alter lubricating grease in time. When changing grease, the aged grease ought to be taken off, and the oil groove of bearing and bearing go over must be washed with gasoline. Then ZL-3 lithium grease ought to be crammed with 1/two (2 poles) and two/3 (four poles, six poles and 8 poles) of the cavity in between the inner and outer rings of the bearing.
four. When the lifestyle of the bearing is above, the vibration and noise of the motor will boost obviously. When the radial clearance of the bearing reaches the pursuing worth, the bearing should be changed.
five, when eliminating the motor, it is Ok to get rid of the rotor from the shaft extension or the non extension end. If it is not essential to unload the supporter, it is a lot more convenient to consider out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from becoming destroyed.
six. When changing the windings, the form, size, turns and gauges of the original windings have to be recorded. When these information are missing, they ought to be received from the producer and the authentic designed windings need to be transformed at will, which frequently deteriorates 1 or many functionality of the motor or even makes it not possible to use them.

 

 

Spot Supply of Small and Medium DC Motor in Z4-315-21 160kw 440V 500rpm Motor Plant