Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1600-18 2150 1600kv 6kv IP20

I. Overview
The big three-stage synchronous motor for TK series air compressor is a high-overall performance series item specifically created and developed by our organization for the load of air compressor.
This collection of motors adopts new engineering, new materials, new procedures, beautiful substance assortment, and advanced producing. It has the qualities of small dimensions, gentle bodyweight, gorgeous physical appearance, higher effectiveness, reduced sound, minimal vibration, protected and trustworthy procedure, and hassle-free use and servicing.

2. Implementation standards
GB755 Rotating Motor Score and Performance
Classification of GB/T997 rotary motor composition sort, set up variety and junction box position (IM code)
GB/T1571 3-phase synchronous motor check approach
GB/T1993 Rotating Machine Cooling Method
GB/T4942.one Defense class (IP) classification of the general composition of rotating electrical equipment
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft middle top of 56mm and above
GB/T10069 Rotating Machine Sounds Measurement Method and Limit
JB/T8667.one CZPT Problems of Massive 3-period Synchronous Motor Part 1: TK Series
three. Simple complex parameters
Energy selection: 250~10000KW
Rated voltage: 6000, 10000V
Rated velocity: 250, 273, 300, 333, 375, 428, 500, 600r/min
Rated frequency: 50HZ
Safety level: IP00, IP20, IP23, IP44
Insulation class: F
Quota: SI
Cooling method: IC01, IC37, IC81W
Installation technique: IM7311, IM5710, IM7312, IM7315
*Can be made in accordance to other parameters in accordance to person wants
4, technical attributes
four.1 The structural style is reasonable, protected and reliable, and the ability to phase out of action is strong.
4.two The primary insulation framework employing new insulating materials has substantial voltage resistance and long motor existence.
4.3 The temperature increase margin is huge. The motor adopts F-class insulation, and the temperature increase is assessed according to the temperature rise limit of the B pole insulation.
four.4 The security device is advanced and full.
four.one.1 The stator windings and bearings are geared up with temperature detection units, which can detect, alarm and excursion.
four.4.two Shutdown room heater with anti-condensation influence.
4.5 Large inertia. Motors with various moments of inertia can be developed in accordance to person wants.
5, construction type
five.1 The all round structure of this collection of motors is welded with metal plates for the frame, stop include, and bottom plate. The motor is an unbiased cavity, and the slip ring can be made with different protection levels according to consumer needs.
five.two Stator: The stator body is welded by metal plate. The motor stator outlet is led out by a high-voltage rubber cable. The outlet place can be led out from the reduced part of the base or from the primary junction box on the facet of the motor.
The stator core is superimposed by minimal-decline silicon metal sheets, and the core sections are separated by radial air flow ducts.
The stator winding is F quality insulation, and the temperature rise is assessed according to B quality to assist prolong the service lifestyle. It adopts VPI all round dipping paint remedy, which has large electrical efficiency, mechanical energy, insulation overall performance, dampness resistance and thermal balance.
five.3 The rotor magnetic pole core is produced of laminated steel plates, and has different constructions these kinds of as magnetic pole screws and T tails. The rotor bracket has air flow holes and is outfitted with a admirer, which can effectively manage the temperature rise of the rotor.
5.4 Undertake seat type spherical sliding bearing. The bearings are insulated to avert shaft currents.
Use new lubricating oil and thin-walled bearing alloy tiles, and established electromagnetic centerline indicators.
5.five According to user demands, the slip ring can be made as a optimistic force ventilation framework to enhance the security of the motor. The overall duration of the motor with the good strain air flow composition of the slip ring is slightly improved.
six. Problems of Use
six.1 Voltage fluctuation: ±5% (It can operate beneath ±10% underneath the situations of 7.3 in GB755)
six.2 Frequency fluctuation: ±2%
6.three The altitude does not exceed 1000m
six.four The maximum ambient temperature does not exceed +40ºC, and the minimal is 0ºC.
Seven, product description
 TK1250-16/2150

Outer diameter of stator punch (Φ2150mm)

Number of poles (sixteen poles)

Rated power (1250KW)
A few-phase synchronous motor for compressor
8. Purchasing recommendations
eight.1 Prior to positioning an purchase, make sure you refer to the item catalog of this collection to make clear the required merchandise model, specs and other data. If there is a discrepancy between the requirements and the samples, please speak to our organization.
8.2 The motor design, rated power, synchronous speed, rated voltage, rated frequency, defense stage, instant of inertia, rotation course, installation sort, etc. should be indicated when purchasing.
8.3 The sample technical knowledge sheet only lists the related info of motors with rated voltages of 6KV and 10KV. If customers want other voltage levels, our firm can also give appropriate complex info when ordering.
8.four The technological knowledge and proportions in the sample are only for reference when the user selects the product. The formal details will be supplied by the organization following the deal or technological settlement is signed.
8.5 If there are any other unique requirements, please offer the demands and indicator the appropriate technical settlement when purchasing.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1600-18 2150 1600kv 6kv IP20